If you are connected to the internet and have a laptop or a Blackberry, you need a Comcast Business Router to access the internet. This is actually a cable modem connected to your home network, which also has wireless capabilities. If you connect to your modem via wireless then it is known as a wireless access point (wAP). The wireless port acts just like a phone line connecting you to the modem. The difference is that when you log into your modem via wireless you are actually connecting yourself and not just your modem to the wireless network.

 

Normally you won't need to change the password of your comcast business router login. It normally is set by the manufacturer. You need to change it however if you want to access non-free software on your modem or to change other system settings, such as those related to wireless internet connection.

 

How to change the password of your comcast business router login is quite easy. The first step you need to do is to disconnect the modem from the wireless network. Normally you would do this by unplugging its connection cable from the modem and then unplugging the router from its modem as well. Then you need to open your modem's casing and find the reset button, which is usually located on the rear side of the modem.

How to Change Your Comcast Business Router login Information

 

If you find the reset button, you should pull out the plug that connects the modem to the wall. It is next to the three pronged surge protector. There you will find the SSIDs or serial numbers. You need to remove one of them (usually the lower-case "ssid" or the uppercase "SSID") to access the configuration utility. Once you have found the SSIDs and you have completed logging in as the administrator (or user) of the system, you can change your password.

 

The second step is to access the wireless configuration utility. Here you need to enter the WEP key that is associated with the SSID of your router into the given field. You have to enter a new password in order to change your existing password. And then you have to click on Save to update your WEP information.

 

Another important step you need to follow is to reset the WEP settings of your modem to the default state. In the setup screen, click on the WEP button for more than 15 seconds. This will bring up a recovery mode which allows you to reset the WEP. If you find that your router is in recovery mode, you may not be able to proceed further because the router won't accept any other reset.

 

At this stage, you should go to the Administration Tab on your modem and change the default IP address. Then click Save to update the changes. Once you are done with these steps, you should restart your modem. Now you have successfully configured your Comcast Business Router to connect to the internet without any hitch.

 

Now you don't need to worry about it anymore. Every time you try to log on to the internet, you will use your default IP address instead of your personal one. Happy browsing!

 

Sometimes you may find some unwanted entries in your router settings such as those related to software. These entries prevent you from logging into the Wi-Fi directly when you try to connect to the internet. You will first have to clear all the entries and then restart the modem. The wireless drivers should also be updated if they are outdated. To update the drivers, connect to your modem and run a diagnostics test.

 

For additional help on Wi-Fi security, you can call your cable provider's technical support. They usually have the answers to common questions like whether your devices are protected even when not in the default security mode. Also, they can give you advice on how to secure your device properly. However, certain basic security questions like the SSID and WEP password should be answered even in the case of routers in the normal security mode. These can be achieved with the help of a WPA2 password, which is created by entering a secret word in the security mode.

 

It is highly important that you change the password at least once in every three months. If you have forgotten or lost the password, you can reset it with the help of the instructions given in your router's user manual. Before resetting the password, make sure that all applications, utilities and features on your computer are closed down and that you turn off your modem. After you have reset the password, you should restart the modem.

Thanks for checking this blog post, If you want to read more articles about comcast business router login don't miss our blog - Crossfitfullcircle We try to update our site every week